The YD-ESP32-S3 core board is designed by VCC-GND Studio. If necessary, you can visit www.vcc-gnd.com for purchase. The device uses the ESP32-S3 chip, which can be used for the test prototype of the Internet of Things application and can also be used for practical applications. It is equipped wit
The new ESP32-S3 module - Extreme low power 1nA! ELPM-S3 by OBJEX
VCC-GND Studio YD-ESP32-S3 (DevKitC 1 clone): high-resolution
Arduino IDE Setup - 8MB Flash/No PSRAM
ESP32 ESP32-S3 WiFi+Bluetooth IOT ESP32-S3-DevKit C N16R8
ESP32-S3-DEV-KIT-N8R8 - Waveshare Wiki
ESP32-S3-DevKitC-1 v1.1 - ESP32-S3 - — ESP-IDF Programming Guide
ESP32-S3-USB-OTG — esp-dev-kits documentation
12 Euros ESP32-S3-DevKit-LiPo board runs Linux 6.3 - CNX Software
ESP32 S3 DevKitC 1: high-resolution pinout and specs – Renzo
ESP32 S3-WROOM-1 Dual Type-C USB N16R8 Micropython Board Robotics
ESP32-S3-DevKitC-1 開發板樂鑫WROOM-1-N16R8 已焊接針腳16MB 記憶體
The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB
ESP32-S3 Board, 16MB Flash, 8MB RAM, USB Type-C, PCB Antenna
ESP32 / ESP32-S3 WiFi+Bluetooth Internet Of Things Dual Type-C
HFS /yd-data/YD-ESP32-S3/5-public-YD-ESP32-S3-Hardware info/