Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122
IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4
No backlight is required, and the display content of the last screen can be maintained for a long time after power off Low power consumption, only
waveshare 2.13“ e-Paper Display HAT for Raspberry Pi 250x122 Black/White E-Ink Screen SPI Interface Supports Partial Refresh Rev2.1
IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4
Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122
Waveshare 2.13inch E-ink Display Hat For Raspberry Pi 250x122 Resolution E- paper Spi Supports Partial Refresh Version 2 - Demo Board - AliExpress
2.13 Inch E-Ink Display HAT 250x122 E-Paper SPI InterfaceScreen for Raspberry Pi 4B 3B+ 3B Zero STM32 Jetson Nano for Arduino
2.7inch E-Ink display HAT, 264x176 resolution. with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power
waveshare 2.7inch E-Ink Display HAT,264x176 Pixel Black,White Two-Color 3.3V/5V E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! 2.13 capacitive
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT Compatible with Raspberry Pi4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W 250×122 Pixels Black/White
Provide online user manual (examples for Raspberry Pi Raspberry Pi Zero /Zero W) Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT Compatible with Raspberry Pi Zero/Zero W 250×122 Pixels with ABS Protection Case Supports Partial
Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! This is an E-Ink
waveshare 2.13inch E-Ink Display HAT Compatible with Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 212x104
Waveshare 2.13inch E-Ink Display Hat, 250x122 Resolution 3.3V/5V Black White Two-Color E-Paper Screen Module for Raspberry Pi Zero/Zero w/Zero WH/2B/3B/3B+, Sup
Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! This is an E-Ink
Waveshare 2.7inch E-Ink Display HAT Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 264x176 Resolution SPI
Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Waveshare 2.13inch E-Ink Screen Display Hat (B) for Raspberry Pi 212x104 Resolution Three-color Electronic E-Paper with Embedded Controller Communicat
Waveshare 9.7inch E-Ink Display Hat Compatible with Raspberry Pi4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W 1200x825 Resolution IT8951 Controller Usb/
2.13inch SPI Touch Screen ePaper E Paper Eink Display Module HAT Kit for RPI 0 Raspberry Pi Zero 2 W WH 3B Plus 3 Model B 4 4B 5 - AliExpress
