Capricorn 1 Meter XS Low Friction 1.75mm Bowden Tubing –

NOTE: Price is per Meter. Lengths up to 10m will be one consistent piece unless otherwise requested. One Meter of Capricorn's flagship PTFE Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer diameter for 1.75mm filaments. This is, hands down, the single best PTFE Bowden tub
NOTE: Price is per Meter. Lengths up to 10m will be one consistent piece unless otherwise requested. One Meter of Capricorn's flagship PTFE Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer diameter for 1.75mm filaments. This is, hands down, the single best PTFE Bowden tubing you can buy for your home 3D printer. Guaranteed to always be the right diameter, and perfectly round. Print flexible filaments without the binding up that happens with over-diameter tubes. Each meter of tubing comes with one Capricorn sticker to decorate your printer. Data Sheet Premium XS Series Dark Blue Tubing Additives Blue Color and Secret High Lubricity Additive Mixture Best For Chunky Filaments YES Best For Flexible Filaments YES Can See Through NO Pulling Friction♠ 0.8 Color Dark Blue Density (kg/m3) 2300 +/-100 Hardness 60-65 Inner Diameter (mm) 1.90 +/- 0.05 Linear Thermal Expansion at 250 °C 2.2-3.3% Material Highest Quality Pure Virgin PTFE Melting Point (°C)♥ up to 340 Outer Diameter 3.95 +/- 0.05 Roundness (ϵ) < 0.1 Stiffness§ Medium High Thermal Conductivity (W/m-k) 0.25 Wear Rate (gm/s) 0.01 Young's Modulus (GPa)¥ 0.53   ♠Pulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter. §Other Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS. ¥Young's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series. ♥Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures. Printing high temperature materials may create dangerous off-gassing. Please refer to the Safety Page.

Capricorn XS Series PTFE Bowden Tubing for 1.75mm Filament — Micro Swiss Online Store

Capricorn XS Tubing

OD- 4.0mm, One meter of our flagship PTFE Capricorn Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer

1 Meter- XS Low Friction 1.75mm Bowden Capricorn Tubing

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Voxelab Aquila 1m Capricorn

Capricorn XS Series Bowden Tubing

Buy Creality Capricorn XS Series Low Friction PTFE Bowden Tubing

Capricorn Bowden PTFE Tube XS

Authentic Capricorn PTFE Bowden Tubing (1 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet

Capricorn TL Transparent PTFE Bowden - 3DJake International

Capricorn XS Series PTFE Bowden Tubing for 1.75mm Filament — Micro Swiss Online Store