MAX HTE A/B HIGH TEMPERATURE EPOXY THIS EPOXY RESIN SYSTEM REQUIRES A HEAT POST CURE TO ACHIEVE COMPLETE CURE. USING SOLAR HEAT, INFRARED RADIANT HEAT OR THE USE OF A PROCESSING OVEN CAN BE USED TO POST CURE THE RESIN SYSTEM. IMPREGNATING RESIN FOR CARBON FIBER FIBERGLASS ADHESIVE PROTECTIVE COATING CASTING RESIN ELECTRICAL POTTING COMPOUND COIL COATING FOR MOTOR WINDINGS 40-Ounce Kit 1 QUART OF RESIN OR PART A (32 OUNCES) 1/2 PINT OF CURING AGENT (8 OUNCES) 4:1 MIX RATIO Other Kit Sizes Available: 80 Oz.
MAX GPE RED 48oz. - EPOXY RESIN RED COATING GEL COAT REPAIR - The Epoxy Experts
MAX BOND LOW VISCOSITY 1 GALLON - EPOXY RESIN BOAT BUILDING MARINE GRADE HIGH STRENGTH FIBERGLASSING RESIN - The Epoxy Experts
P-17 Black High Heat Resistant Rigid Filler
With respect to the raw materials selection -fabric and resin, the fabricating process and the and curing and test validation of composite part. FOR
Heat Resistant Clear Epoxy Resin 4 Potting, Casting, Glue, & Impregnating Resin
Amazing Clear Cast - Casting resin clear-ly the winner!
MAX BOND LOW VISCOSITY 32 OZ. - EPOXY RESIN FIBERGLASSING MARINE AERO & AUTO BOAT BUILDING HIGH IMPACT - The Epoxy Experts
Thixotropic Consistency, Limited flow For Less Leaks And Drips Opaque Black Color To Permanent Mask Propietary Circuit Design & Components 2:1 Mix
Epoxy Potting Compound 4 Electronic PC Board, None Sagging, Controlled Flow 4 Less Drips & Sag, Injectable, Insulate AC/DC, Opaque Black to
Vinyl Ester Resin, High-Strength Vinyl Resin
FOR FIBERGLASS OR CARBON FIBER COMPOSITE GASOLINE TANK FABRICATION, USE AS AN IMPREGNATING RESIN FOR CARBON FIBER AND FIBERGLASS, CHEMICAL RESISTANT
MAX GRE 96oz. - EPOXY RESIN GASOLINE RESISTANT 4 COATING GLUE FIBERGLASSING CARBON FIBER
MAX CLR 48 OZ. - EPOXY RESIN FOOD SAFE FDA COMPLIANT VERY CLEAR HIGH IMPACT COATING - The Epoxy Experts
A two part epoxy coating and laminating resin for use in marine and woodworking applications. Use as a sealer, topcoat, saturation coat, or tie-coat.
System Three F1000K38 Amber Cold Cure Kit, 12 oz. Bottle
The PC products pc-concrete is a two-part epoxy adhesive paste used to fill and repair cracks in concrete and to anchor threaded rods£? bolts and dowels into concrete£? grout-filled block and unreinforced masonry in indoor and outdoor applications. The epoxy is made from a high-tack paste that resists moisture for application in damp environments and can be used in vertical applications.
PC-Concrete Two Part Epoxy Concrete Anchoring Epoxy 1.4 oz
Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive with Nozzle and Extension SET3G22-N - The Home Depot
MAX 1618 96 OZ. - EPOXY RESIN ULTRA CLEAR - The Epoxy Experts