M5StickC PLUS2 ESP32 Mini IoT Development Kit

4.7

(118)

Écrire un avis

Plus

€ 10.50

Ajouter au panier

quantité

En Stock

Description

The M5StickC PLUS2 is a refined version of the M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip with built-in WiFi. Packed into its compact size are various hardware components, including infrared, RTC, a microphone, and much more! Its 1.14" TFT screen has a resolution of 135 x 240, driven by the ST7789V2. With an upgraded 200mAh battery and support for HAT and Unit series products, this development tool is versatile and beginner-friendly, making it easy to prototype IoT projects. The M5StickC PLUS2 opens up creative possibilities without overwhelming complexity. Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why? Power On: Wake-up can be started by pressing "BUTTON C" for more than 2 seconds, or an
Official Raspberry Pi reseller. The ultimate Raspberry Pi & maker superstore with all of the biggest brands under one roof. Raspberry Pi Zero stockist. Next Day delivery available.
The M5StickC PLUS2 is a refined version of the M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip with built-in WiFi. Packed into its compact size are various hardware components, including infrared, RTC, a microphone, and much more! Its 1.14 TFT screen has a resolution of 135 x 240, driven by the ST7789V2. With an upgraded 200mAh battery and support for HAT and Unit series products, this development tool is versatile and beginner-friendly, making it easy to prototype IoT projects. The M5StickC PLUS2 opens up creative possibilities without overwhelming complexity. Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why? Power On: Wake-up can be started by pressing BUTTON C for more than 2 seconds, or an IRQ signal triggered by RTC regularly. After triggering the wake-up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again. Power Off: When there is no USB external power supply, press BUTTON C for more than 6 seconds; Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. Features ESP32-PICO-V3-02-Base，support WiFi Built-in 6-Axis IMU IR transmitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lithium Polymer Battery@200mAh Extendable Socket Built-in Passive Buzzer Wearable & Wall mounted Compatible with multi-platform development: UIFlow MicroPython Arduino .NET nanoFramework Specifications Resources Parameters ESP32 ESP32-PICO-V3-02 240MHz dual core,support wifi,2 MB SPI PSRAM,8 MB SPI flash PSRAM 2 MB PSRAM Flash 8 MB flash Power Input 5V @ 500mA Port TypeC x1, GROVE (I2C+I/0+UART) x1 LCD screen 1.14, 135 x 240 Colorful TFT LCD, ST7789v2 Button Custom button x3 LED Green LED MEMS MPU6886 Buzzer Built-in buzzer MIC SPM1423 RTC BM8563 Battery 200mAh @ 3.7V Antenna 2.4G 3D Antenna PIN port G0, G25/G36, G26, G32, G33 Operating Temperature 0°C to 60°C Case Material Plastic (PC) Product Size 48 x 25 x 13mm Package Size 114 x 64 x 23mm Product Weight 17g Package Weight 24.8g Driver Installation Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP34X (for CH9102) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. If the program cannot be downloaded normally (the prompt is overtime or failed to write to target RAM), you can try to reinstall the device driver. Driver Name Applicable Driver Chip Download Link CH9102_VCP_SER_Windows CH9102 Download CH9102_VCP_SER_MacOS v1.7 CH9102 Download Resources Product Wiki Schematic ESP32-PICO-V3-02 Package Contents 1x M5StickC Plus2