Honeywell L5100-ZWAVE - LYNX Touch Z-Wave Controller - Alarm Grid

Honeywell L5100-ZWAVE - LYNX Touch Z-Wave Controller - Alarm Grid

4.6
(361)
Écrire un avis
Plus
€ 20.99
Ajouter au panier
En Stock
Description

The Honeywell L5100-ZWAVE is a Z-Wave® controller for the L5100 LYNX Touch wireless alarm control panel. The newer L5200, L5210, and L7000 LYNX Touch Systems also support this module. Buy the L5100-ZWAVE from Alarm Grid.
The Honeywell L5100-ZWAVE is a Z-Wave® controller for the L5100 LYNX Touch wireless alarm control panel. The newer L5200, L5210, and L7000 LYNX Touch Systems also support this module. Once equipped with the L5100-ZWAVE, your LYNX Touch L5100 and L5200 security systems can be used to control up to (3) Z-Wave thermostats, (4) Z-Wave door locks and (40) Z-Wave light modules. Meanwhile, the beefier LYNX Touch L7000 supports (4) Z-Wave thermostats, (6) Z-Wave door locks and (40) Z-Wave light modules. The L5100-ZWAVE supports up to (20) Z-Wave scenes, (20) rules and (20) schedules. A Z-Wave scene is used to control multiple Z-Wave modules all at the same time. For example, you can setup a bedtime scene that turns off all lights, locks all doors and sets your thermostats to a higher temperature. A Z-Wave rule is used to automate specific Z-Wave modules based on your security system’s zone activity, alarm status or alarm condition. A Z-Wave schedule is used to activate a scene based on a specific time. The Z-Wave scenes, rules and schedules for the L5100-ZWAVE controller are all programmed within your Honeywell LYNX Touch wireless alarm control panel. If you are signed up for AlarmNet’s Total Connect 2.0 interactive service, you can add (20) more scenes for a total of (40). Scenes 21-40 are managed and viewed only through your Total Connect 2.0 account. Unlike the L5000 LYNX Touch wireless alarm control panel and the Honeywell 5800ZBRIDGE, which only provide local and limited home automation control, the newer LYNX Touch models and the L5100-ZWAVE provide full remote home automation control. You can use the LYNX Touch wireless alarm control panel’s easy icon driven touchscreen to turn specific Z-Wave light modules on or off, set your Honeywell ZWSTAT thermostats to certain temperatures and lock and unlock your Z-Wave enabled door locks. You can also use your Total Connect 2.0 account to remotely control all your Z-Wave devices from anywhere that has internet access. The Honeywell LYNX Touch security systems are the first and only Honeywell security systems to offer on-board remote wireless home automation control and status. Please note that there are two (2) different versions of the Honeywell L5100-ZWAVE. The older 2012 model, also known as Version 045401, has been known to experience beaming issues with Z-Wave locks. This can result in the batteries for the locks draining faster than usual. The new 2018 model, also known as Version 045500, uses the same 300-Series Z-Wave Controller as what is found in the Honeywell Lyric Controller. The new version does not have this issue. Any L5100-ZWAVE purchased from Alarm Grid will be the newer model, though we have sold the older model in the past, and you may still encounter the older model elsewhere. If you aren't sure which one you have, check the version number, which can be found on a sticker on the module itself or on the packaging.Many different Z-Wave devices will work with the Honeywell L5100-ZWAVE controller. You should refer to the installation instructions for the specific device when adding it to your Honeywell wireless security system. The following table shows some of the Z-Wave devices that are compatible with the L5100-ZWAVE controller, although not all have been tested by Honeywell. Door Locks Thermostats Appliance Lights Yale Real Living Push Button Lever Lock Honeywell ECC HomeManageable Appliance Module Leviton/ViziaRF+ Switches Yale Real Living Touchscreen Lever Lock Wayne Dalton Z-Wave Thermostat Wayne Dalton Small Appliance Module Leviton/ViziaRF+ Dimmers Yale Real Living Push Button Deadbolt Lock Trane Z-Wave Thermostat GE Wireless Lighting Control Plug-In Appliance Module Leviton/ViziaRF+ Plug-In Modules Yale Real Living Touchscreen Deadbolt Lock Residential Control Systems Thermostat (Model TZ45) SOMFY GE Wireless Lighting Control Dimmers Schlage Link Deadbolt Lock Intermatic InTouch Thermostat (Model CA8900) Cooper In-Wall Duplex Receptacle Module (Model RF9505-TDS) GE Wireless Lighting Control Switches Schlage Link Level Lock GE Wireless Lighting Control Plug-In Lamp Modules Kwikset Smartcode Lever Lock Intermatic In-Wall Receptacle (Model HA01) Kwikset Smartcode Deadbolt Lock Cooper Plug-In Lighting Switch Module (Model RFAPM) Aeon Labs Lamp/Dimmer Module (Model DSC06106-ZWUS) Remotec Lamp Dimmer Module (Model ZDS-100US)

Honeywell L5100 Home Automation Guide

Honeywell L5100-ZWAVE: Installing the module into a LYNX Touch L5100

Honeywell L5100-WIFI - AlarmNet LYNX Touch WiFi Alarm Monitoring Communicator - Alarm Grid

How Do I Automate Arming with Z-Wave Locks on LynxTouch? - Alarm Grid

Can I use a Honeywell L7000 system without monitoring? - Alarm Grid

DIY Wireless Home Alarm Top Seller - Honeywell Lynx Touch L5210/L3000

How do I Program Z-Wave Devices to an L5100? - Alarm Grid

How to change the volume contrast and brightness on the LYNX Touch L5100 Control Panel

Honeywell L5100-ZWAVE - Z-Wave Control Communication Module : Electronics

Honeywell l5100 ZWAVE Install Guide, PDF, Electromagnetic Interference

Honeywell l5100-programming-guide

Honeywell L5100 ZWAVE