System Sensor CO1224T - System Carbon Monoxide Detector with 10

The System Sensor CO1224T is a wired Carbon Monoxide gas detector meant to be used with an alarm system. The electrochemical sensing technology is fully UL compliant, meeting the standards of UL2075. Similar to many modern CO detectors, this device has a 10-year end-of-life timer. Buy the CO1224T here!
The System Sensor CO1224T is a wired Carbon Monoxide gas detector meant to be used with an alarm system. The electrochemical sensing technology is fully UL compliant, meeting the standards of UL2075. Similar to many modern CO detectors, this device has a 10-year end-of-life timer. This sensor is also available in a round version, System Sensor CO1224TR.The power connections must be 12 or 24VDC. This can be accomplished by wiring to the alarm panel's auxiliary power terminals, or by setting up an auxiliary power supply. When idle, the CO1224T draws 20mA of current. If the detector senses carbon monoxide gas it will activate. When in alarm, the sensor draws 40mA of current to power the local sounder and LED. If you have the CO1224T connected to an alarm panel's auxiliary power terminals, be sure to calculate the current draw at 40mA for each CO1224T on the system. For longer wire runs, we recommend using 18 gauge 4 conductor cabling, though smaller gauge wire can be used, if necessary.The zone wiring connections can be landed on any open zone terminals on a control panel that supports hardwired inputs, such as a VISTA-20P. Any CO detection zone should be programmed with the appropriate carbon monoxide zone type. On the VISTA-20P, this would be Zone Type 14. Since this CO Detector is a normally open (NO) device, connect the end-of-line resistor in parallel across the zone terminals at the CO for proper wire supervision. If multiple CO1224T devices are wired to the same zone, the resistor should be installed at the last detector in the circuit.The CO1224TR also has two (2) trouble terminals, marked T. The normally closed trouble relay must be used when installing to UL2075 code, and it is strongly encouraged that it be used for any installation. When the detector senses an internal issue, such as loss of power, or when it has reached its end of life, the trouble circuit opens. This will alert the panel that there is an issue. Once the issue has been addressed a second disarm should clear the trouble display so that the system can continue to provide carbon monoxide protection. The trouble circuit can either be wired to its own separate zone or wired in series with the CO1224T alarm terminals. We recommend using Real Test patented technology which supports testing measures with canned CO. When tripped, the System Sensor CO1224T will produce a local 85 dB, temporal-4 sound, and the LED will begin flashing. If the zone is properly wired and programmed, it will also produce a system alarm event. If central station monitoring is being used, a report will be sent to the monitoring station. Carbon monoxide gas is odorless, colorless, and tasteless. When a CO alarm is indicated, everyone should leave the premises and wait for the fire department to determine when it is safe to return.Please note: CO alarms require Fire Department dispatching. Even if you provide the proper false alarm password, the monitoring station is required to dispatch when a carbon monoxide alarm is received. Before testing, always remember to place your security system on test mode with the monitoring station if you are enrolled in central station monitoring. Specifications Device Type: Carbon Monoxide Sensor CO Detection: Electrochemical Voltage: 12/24 VDC Current: 20mA standby/ 40mA alarm / 75mA test Sounder: 85 dB, Temporal-4 Dimensions: 5.1 L x 3.3 W x 1.3 H (130mm L x 84mm W x 33mm H) Tamper Detection: Yes Wire Gauge: Accepts 14-22 AWG Mounting Options: Single-gang back box or surface mount to wall or ceiling Sensor Life: ~10 Years Alarm Relay: Form B (Normally Open) Trouble Relay: Form A (Normally Closed) Operating Temperature: 32°F to 104°F (0°C - 40°C) Operating Humidity: 22% to 90% (Relative)

Gentex CO1209F 120VAC 9VDC Single, Multiple Station Carbon

The System Sensor CO1224T, CO1224TR, and CO1224A (Canada) Carbon Monoxide (CO) Detectors use a highly accurate and reliable electrochemical sensing

CO1224T SYSTEM SENSOR CO2 DETECTOR

BRK CO5120BN 120VAC/DC Hardwired Carbon Monoxide Alarm with

Carbon monoxide detector signaling device finish white single gang box mounting alarm current 40ma peak output 85 dba height 6 in length 6 in width 6 in ambient temp. Limits 32 to 104 f alarm aux. Contact 30vdc 0.5 A humidity range 22 to 90 percent rh standby state 20 ma voltage 12/24 vdc standards ul includes pendant mount for use with alarm control panels carbon monoxide detector4-wire detector is designed for system operation. Operates on most industry security and fire alarm control panels.

System Sensor CO1224T Carbon Monoxide Detector

1430984 Potter CO-1224T System Sensor 4-Wire Co Detector

main Carbon Monoxide Detector

Co1224

novo na caixa

System Sensor CO1224T Carbon Monoxide Detector

The System Sensor CO1224T CO detector provides early warning of dangerous carbon monoxide levels by using electrochemical sensing technology to

SYSTEM SENSOR CO1224T 12/24 volt, 4-wire, system-monitored C02 carbon monoxide detector w/ RealTest Technology

System Sensor Carbon Monoxide Detector 4-wire 12/24 volt C01224T

System Sensor COSMO-2W 2-wire Smoke CO Detector Combo

CO1224T - System Sensor

The CO1224TR Carbon Monoxide (CO) Detector with RealTest from System Sensor is a round version of the award-winning System Sensor CO1224T CO detector. It is designed for ceiling or wall applications where a round device better suits the aesthetics. Like the CO1224T, the CO1224TR includes RealTest - the first and only field functional CO test fully compliant with NFPA.

System Sensor CO1224TR Carbon Monoxide Detector

System Sensor Fire Detection